Built in China and distributed in North America by Shredderhotline.com Company, the Genox Xeno 100-72 Eidal Shear Shredder GX Series 1 is a two-shaft machine designed to shred scrap metal and a range of waste materials. These shredders are 100 inches long at the cutters and 72 inches wide , using a 24-inch centre-to-centre shaft design, and use 34-inch-diameter, 3- to 4-inch thick cutters. Units provide 150-hp on each shaft, for a total 300-hp drive. Other features include: 250 to 1 ratio gearboxes with service factor of 2.5; 6 rpm on the cutter shaft with other shafts speeds available; a control panel with emergency stops for full automation; and a hydraulic-operated ram feed.
Units include hopper, stand, walkways, stairs and safety rails, as well as an Eidal Quick Change System, which allows operators to easily unbolt and remove the complete blade, spacer and shaft assembly, thereby decreasing downtime. The complete assembly exchange also allows users the option to change the blades and re-build the existing ones in the machine or out of the machine, on or off premises, while the operation continues to process material.
Built in China and distributed in North America by Shredderhotline.com Company, the Genox Xeno 100-72 Eidal Shear Shredder GX Series 1 is a two-shaft machine designed to shred scrap metal and a range of waste materials. These shredders are 100 inches long at the cutters and 72 inches wide , using a 24-inch centre-to-centre shaft design, and use 34-inch-diameter, 3- to 4-inch thick cutters. Units provide 150-hp on each shaft, for a total 300-hp drive. Other features include: 250 to 1 ratio gearboxes with service factor of 2.5; 6 rpm on the cutter shaft with other shafts speeds available; a control panel with emergency stops for full automation; and a hydraulic-operated ram feed.
Units include hopper, stand, walkways, stairs and safety rails, as well as an Eidal Quick Change System, which allows operators to easily unbolt and remove the complete blade, spacer and shaft assembly, thereby decreasing downtime. The complete assembly exchange also allows users the option to change the blades and re-build the existing ones in the machine or out of the machine, on or off premises, while the operation continues to process material.
Built in China and distributed in North America by Shredderhotline.com Company, the Genox Xeno 100-72 Eidal Shear Shredder GX Series 1 is a two-shaft machine designed to shred scrap metal and a range of waste materials. These shredders are 100 inches long at the cutters and 72 inches wide , using a 24-inch centre-to-centre shaft design, and use 34-inch-diameter, 3- to 4-inch thick cutters. Units provide 150-hp on each shaft, for a total 300-hp drive. Other features include: 250 to 1 ratio gearboxes with service factor of 2.5; 6 rpm on the cutter shaft with other shafts speeds available; a control panel with emergency stops for full automation; and a hydraulic-operated ram feed.
Units include hopper, stand, walkways, stairs and safety rails, as well as an Eidal Quick Change System, which allows operators to easily unbolt and remove the complete blade, spacer and shaft assembly, thereby decreasing downtime. The complete assembly exchange also allows users the option to change the blades and re-build the existing ones in the machine or out of the machine, on or off premises, while the operation continues to process material.
Built in China and distributed in North America by Shredderhotline.com Company, the Genox Xeno 100-72 Eidal Shear Shredder GX Series 1 is a two-shaft machine designed to shred scrap metal and a range of waste materials. These shredders are 100 inches long at the cutters and 72 inches wide , using a 24-inch centre-to-centre shaft design, and use 34-inch-diameter, 3- to 4-inch thick cutters. Units provide 150-hp on each shaft, for a total 300-hp drive. Other features include: 250 to 1 ratio gearboxes with service factor of 2.5; 6 rpm on the cutter shaft with other shafts speeds available; a control panel with emergency stops for full automation; and a hydraulic-operated ram feed.
Units include hopper, stand, walkways, stairs and safety rails, as well as an Eidal Quick Change System, which allows operators to easily unbolt and remove the complete blade, spacer and shaft assembly, thereby decreasing downtime. The complete assembly exchange also allows users the option to change the blades and re-build the existing ones in the machine or out of the machine, on or off premises, while the operation continues to process material.
